For Aerosol Can Packing:
- Shake Can well before use.
- Fit straw onto nozzle to reach inaccessible areas.
- To lubricate, spray directly onto targeted areas.
- To treat rusted parts, spray directly to saturate target areas. Allow to soak for 5-10 minutes. Agitate if necessary.
- To displace moisture, spray onto contact points.
- To prevent rust, first treat rusted areas, then re-spray directly onto target area to leave a layer of protection. Do not wipe off.
- Use short bursts instead of a long continuous spray.
For Bulk Packing:
- Product can be applied using soak, spray and brush methods.
- To lubricate or silence squeak, apply 9-in-1 directly onto squeaky parts.
- To release stuck mechanism, apply 9-in-1 onto seized area and allow it to penetrate on its own or with some agitation at the moving joint.
- To remove rust/oxides, apply 9-in-1 and leave it for 10 minutes. Agitate corroded parts by means of a wire-brush.
- To displace moisture and protect from corrosion, apply 9-in-1 generously onto target surfaces.
